How to Install Automatic Swing Door System

It is best to install automatic doors to large areas like service building, academic buildings and other premises that require frequent and constant movement of people in and out. There are numerous types of automatic swing door that can be installed with new frames and can be retro-fitted to an existing door. This kind of door is a popular choice for those with large areas.

How to install automatic swing door system? This might be the most frequent ask question for those who want to know how this  automatic swing door work and be installed without having compromise with installers.

Before starting on installing, verify if the door swings freely through the full opening and closing movement. The door should be properly reinforce well and anchored well on the wall. A non-reinforced hollow metal frames could be fitted with blind rivnuts furnished by the installer.

Use the assembly that best suits the installation process. When installing the arm of the swing door, a constant pressure to the door is apply to keep the door in a close position. You can install the arm before mounting the unit to the frame. After installing the swing arm, it is necessary to rotate the arm to the direction that would open the door.

Fastening the outswing shoe and the inswing track to the door. Mount the unit after then. To secure the installation of the unit, make sure to follow the right screw that is written on your manual. An additional fastening to the building may be necessary in preventing the operator on moving during the installation.

Install the door stop. Open the door to the desired position. You can prop the door open to your desired position and locate the door stop. Secure the door stop using two screws.

If you’re not sure of what you are doing, better find a professional installer to do the job for you to avoid any risk. Installing automatic swing door requires knowledge of someone who knows how to do it. Always remember that installing an automatic swing door is not just as simple as installing an ordinary door. Yes it may cost you money; yet doing so will assure you that your door is safe for everyone to pass by. You also lessen the cost of maintenance if a professional installer is the one who put up your door. You can also ask him how to prolong the life of your automatic swing door.

http://www.olideautodoor.com/how-to-install-automatic-swing-door-system/

How to Rescreen a Sliding Door

1 Take the screen door off of the track. There might be small pins on the side of the screen automatic door. If you pull the pins out of the sides, you will be able to remove it from the track.

2 Put the screen door face down on a flat surface so you can work with it. The part of the automatic sliding door that is faces outside should be down.

3 Look around the frame of the door until you find a small gray tube. This small gray tube is referred to as the retaining spline. Use the flat-head screwdriver to wedge the spline up and. Pull the spline out of the channel on the sliding door.

4 Remove the screen from the sliding door opener. Lay your new screen over the frame of the sliding door.

5 Spread the new screen over the sliding door frame until you have it as tight as possible. Cut the new screen so you can allow ¼ inch of the screen to remain on the outside of the retaining spline's channel.

6 Use the flat-head screwdriver to push the new screen into the retaining spline's channel. Place the retaining spline into the channel and push it into the channel with your flat-head screendriver.

7 Go around the entire frame with the retaining spline until you have the whole sliding door framed.

8 Replace the door on the track.

a joke about automatic door

http://youtu.be/UMg1JpWm5KY

Chinentech Industrial Limited,we provides all kinds of high quality automatic doors

Company Introduction                   www.olideautodoor.com

Chinentech Industrial Limited is a professional automatic doors manufacturer in China, engaged in design, production, sales and installation of automatic door systems. Since 1992, We have become one of the leading automatic doors manufacturers in China. We provide high-quality automatic entrance systems for all kinds of buildings, such as offices, shopping malls, hospitals, hotels, restaurants, retail business, etc. We also supply complete access control systems for keeping your door system more safe. Types of automatic doors: Automatic sliding doors, Automatic swing doors, Automatic hospital doors, Sliding gate openers, Swing gate openers, etc.

AUTOMATIC SLIDING DOOR

Door range:      Single leaf        Double leaf Door leaf weight: Max 160kg×1   Max 120kg×2 Door width:         600~3000mm    600~1500mm Opening and closing speed: 100~550mm/s (Adjustable) Opening time:     0~9seconds Motor:            DC24V Brushless DC Servo Motor Supply voltage:  Input AC110V/220V; 50-60Hz Working temperature:    -20~50°C

AUTOMATIC SWING DOOR

Swing application：One-way open, single leaf and double leaf standard doors Power supply：  220V/AC 110V/AC 50/60Hz Door width：   1200mm Door weight：   120kgs Opening speed：   2-8 seconds (adjustable) Closing speed：  2-8 seconds (adjustable) Opening time：   0-120seconds (adjustable)   SLIDING GATE OPENER     Models:           SD350          SD450         SD750 Power Supply:   220V/110V AC Rated Power:   370W            550W          750W Torque:           18N.M            28N.M          38N.M Max. Gate Weight: 600~800Kg    1200kg   2000Kg Travel Speed: 14m/min        12m/min         10m/min Operating Ambient Temp:    -20°- +55° Weather-Resistance Rating： IP44      IP44     IP44 SWING GATE OPENER   Motor Power Supply:   24V DC Rated power:   80W Screw Drive Travel:   300mm Rod Speed:   1.6cm/speed Max. Leaf Width and Weight : 3m&300kg Max. Opening Angle:   110° Operating Ambient Temp:   -20° - +55°   AUTOMATIC HOSPITAL DOOR     Door sliding modes: Single-opening      Double-opening Door leaf weight:    ≤1*195 kg             ≤2*185 kg Door leaf width:       600-1200mm           500-1150mm Opening speed : 150-500mm/s(Adjustable)   150-450mm/s(Adjustable) Closing speed : 100-450mm/s(Adjustable)    150-430mm/s(Adjustable) Motor:      24V 100W brushless DC motor Opening time:       0-9s(Adjustable) Voltage:       AC220V 50Hz-60Hz Ambient temperature : -20°C~60°C  Addes: NO.317 Yinqiao Road, East Industrial Area, Shaoxing, Zhejiang Province, China  TEL: +86 571 87641908 E-mail:Chinentech@gmail.com Website:http://www.olideautodoor.com skype: Chinentech MSN:Chinentech@hotmail.com